Novel magnesium-copper hybrid nanomaterials for management of bacterial spot of tomato.

Bacterial spot of tomato (BST), predominantly caused by Xanthomonas perforans (Xp) in Florida, is one of the most devastating diseases in hot, humid environments. Bacterial resistance to copper-based bactericides and antibiotics makes disease management extremely challenging. This necessitates alternative solutions to manage the disease. In this study, we used two novel hybrid copper and magnesium nanomaterials noted as magnesium double-coated (Mg-Db) and magnesium-copper (Mg-Cu), to manage BST. In in vitro experiments, no viable cells were recovered following 4 h exposure to 500 µg/ml of both Mg-Db and Mg-Cu, while 100 and 200 µg/ml required 24 h of exposure for complete inhibition. In viability assay using live/dead cell straining method and epifluorescence microscopy, copper tolerant Xp cells were killed within 4 h by both Mg-Cu and Mg-Db nanomaterials at 500 µg/ml, but not by copper hydroxide (Kocide 3000). In the greenhouse, Mg-Db and Mg-Cu at 100-500 µg/ml significantly reduced BST severity compared to micron-sized commercial Cu bactericide Kocide 3000 and the growers' standard (copper hydroxide + mancozeb) (P < 0.05). In field studies, Mg-Db and Mg-Cu nanomaterials significantly reduced disease severity in two out for field trials. Mg-Db at 500 µg/ml reduced BST severity by 34% compared to the non-treated control without affecting yield in Fall, 2020. The use of hybrid nanomaterials at the highest concentrations (500 µg/ml) used in the field experiments can reduce copper use by 90% compared to the growers' standard. In addition, there was no phytotoxicity observed with the use of hybrid nanomaterials in the field. These results suggest the potential of novel magnesium-copper based hybrid nanomaterials to manage copper-tolerant bacterial pathogens.

Potential of Novel Magnesium Nanomaterials to Manage Bacterial Spot Disease of Tomato in Greenhouse and Field Conditions.

Bacterial spot of tomato is among the most economically relevant diseases affecting tomato plants globally. In previous studies, non-formulated magnesium oxide nanoparticles (nano-MgOs) significantly reduced the disease severity in greenhouse and field conditions. However, the aggregation of nano-MgO in liquid suspension makes it challenging to use in field applications. Therefore, we formulated two novel MgO nanomaterials (SgMg #3 and SgMg #2.5) and one MgOH2 nanomaterial (SgMc) and evaluated their physical characteristics, antibacterial properties, and disease reduction abilities. Among the three Mg nanomaterials, SgMc showed the highest efficacy against copper-tolerant strains of Xanthomonas perforans in vitro, and provided disease reduction in the greenhouse experiments compared with commercial Cu bactericide and an untreated control. However, SgMc was not consistently effective in field conditions. To determine the cause of its inconsistent efficacy in different environments, we monitored particle size, zeta potential, morphology, and crystallinity for all three formulated materials and nano-MgOs. The MgO particle size was determined by the scanning electron microscopy (SEM) and dynamic light scattering (DLS) techniques. An X-ray diffraction (XRD) study confirmed a change in the crystallinity of MgO from a periclase to an Mg(OH)2 brucite crystal structure. As a result, the bactericidal activity correlated with the high crystallinity present in nano-MgOs and SgMc, while the inconsistent antimicrobial potency of SgMg #3 and SgMg #2.5 might have been related to loss of crystallinity. Future studies are needed to determine which specific variables impair the performance of these nanomaterials in the field compared to under greenhouse conditions. Although SgMc did not lead to significant disease severity reduction in the field, it still has the potential to act as an alternative to Cu against bacterial spot disease in tomato transplant production.

Magnesium Oxide Nanomaterial, an Alternative for Commercial Copper Bactericides: Field-Scale Tomato Bacterial Spot Disease Management and Total and Bioavailable Metal Accumulation in Soil.

Copper (Cu) is the most extensively used bactericide worldwide in many agricultural production systems. However, intensive application of Cu bactericide have increased the selection pressure toward Cu-tolerant pathogens, including Xanthomonas perforans, the causal agent of tomato bacterial spot. However, alternatives for Cu bactericides are limited and have many drawbacks including plant damage and inconsistent effectiveness under field conditions. Also, potential ecological risk on nontarget organisms exposed to field runoff containing Cu is high. However, due to lack of alternatives for Cu, it is still widely used in tomato and other crops around the world in both conventional and organic production systems. In this study, a Cu-tolerant X. perforans strain GEV485, which can tolerate eight tested commercial Cu bactericides, was used in all the field trials to evaluate the efficacy of MgO nanomaterial. Four field experiments were conducted to evaluate the impact of intensive application of MgO nanomaterial on tomato bacterial spot disease severity, and one field experiment was conducted to study the impact of soil accumulation of total and bioavailable Cu, Mg, Mn, and Zn. In the first two field experiments, twice-weekly applications of 200 µg/mL MgO significantly reduced disease severity by 29-38% less in comparison to a conventional Cu bactericide Kocide 3000 and 19-30% less in comparison to the water control applied at the same frequency (p = 0.05). The disease severity on MgO twice-weekly was 12-32% less than Kocide 3000 + Mancozeb treatment. Single weekly applications of MgO had 13-19% higher disease severity than twice weekly application of MgO. In the second set of two field trials, twice-weekly applications of MgO at 1000 µg/mL significantly reduced disease severity by 32-40% in comparison to water control applied at the same frequency (p = 0.05). There was no negative yield impact in any of the trials. The third field experiment demonstrated that application of MgO did not result in significant accumulation of total and bioavailable Mg, Mn, Cu, or Zn in the root-associated soil and in soil farther away from the production bed compared to the water control. However, Cu bactericide contributed to significantly higher Mn, Cu, and Zn accumulation in the soil compared to water control (p = 0.05). This study demonstrates that MgO nanomaterial could be an alternative for Cu bactericide and have potential in reducing risks associated with development of tolerant strains and for reducing Cu load in the environment.

Copper-fixed quat: a hybrid nanoparticle for application as a locally systemic pesticide (LSP) to manage bacterial spot disease of tomato.

The development of bacterial tolerance against pesticides poses a serious threat to the sustainability of food production. Widespread use of copper (Cu)-based products for plant disease management has led to the emergence of copper-tolerant pathogens such as Xanthomonas perforans (X. perforans) strains in Florida, which is very destructive to the tomato (Solanum lycopersicum) industry. In this study, we report a hybrid nanoparticle (NP)-based system, coined Locally Systemic Pesticide (LSP), which has been designed for improved efficacy compared to conventional Cu-based bactericides against Cu-tolerant X. perforans. The silica core-shell structure of LSP particles makes it possible to host ultra-small Cu NPs (<10 nm) and quaternary ammonium (Quat) molecules on the shell. The morphology, release of Cu and Quat, and subsequent in vitro antimicrobial properties were characterized for LSP NPs with core diameters from 50 to 600 nm. A concentration of 4 µg mL-1 (Cu): 1 µg mL-1 (Quat) was found to be sufficient to inhibit the growth of Cu-tolerant X. perforans compared to 100 µg mL-1 (metallic Cu) required with standard Kocide 3000. Wetting properties of LSP exhibited contact angles below 60°, which constitutes a significant improvement from the 90° and 85° observed with water and Kocide 3000, respectively. The design was also found to provide slow Cu release to the leaves upon water washes, and to mitigate the phytotoxicity of water-soluble Cu and Quat agents. With Cu and Quat bound to the LSP silica core-shell structure, no sign of phytotoxicity was observed even at 1000 µg mL-1 (Cu). In greenhouse and field experiments, LSP formulations significantly reduced the severity of bacterial spot disease compared to the water control. Overall, the study highlights the potential of using LSP particles as a candidate for managing tomato bacterial spot disease and beyond.

Development of Cannabinoids in Flowers of Industrial Hemp (Cannabis sativa L.): A Pilot Study.

A field study was performed to investigate the development of cannabinoids in flowers of industrial hemp using three day-length-sensitive and two day-length-neutral varieties. Flower samples were analyzed for cannabinoids on a weekly basis from 2 to 4 weeks postanthesis to plant senescence. Results indicate that total THC, CBD, and CBG significantly increased as flowers matured, reaching the greatest concentration during 6 to 7 weeks postanthesis. After a plateau stage of varied length for different varieties, the peak concentrations declined as plants senesced. Total THC was above the 0.3% threshold from 4 weeks postanthesis to the end of the growing season for day-length-sensitive varieties, but this only occurred during 6 to 7 weeks postanthesis for day-length-neutral varieties. The CBD/THC ratio in flowers dynamically changed during the entire reproductive stage for all of the evaluated varieties. The current study provides vital information for successful cultivation of industrial hemp.

Regulatory sampling of industrial hemp plant samples (Cannabis sativa L.) using UPLC-MS/MS method for detection and quantification of twelve cannabinoids.

BACKGROUND: In 2018, the Farm Bill mandated the United States Department of Agriculture to develop regulations governing the cultivation, processing, and marketing of industrial hemp. Industrial hemp is defined as Cannabis sativa L. with a total Δ-9-tetrahydrocannabinol (Δ-9-THC) content ≤0.3%. Therefore, for hemp to become an agricultural commodity, it is important to regulate production by developing standard methods for sampling and testing of the plant material. METHODS: An ultra-performance liquid chromatography-tandem mass spectrometry analytical method for the quantification of twelve cannabinoids was developed. The method was applied to a regulatory sampling trial of three hemp varieties cultivated for cannabidiol (CBD) production. Two samples were taken from 28 plants with one sample being flower only while the other was a composite sample that included flowers, leaves, and stems. RESULTS: The assay method was validated for specificity, range, repeatability, reproducibility, and recovery in accordance with all applicable standards for analytical methods. The results of the regulatory study indicated a significant decrease in the concentration of total Δ-9-THC and total CBD of 0.09% and 1.32%, respectively, between a flower only and a composite sample. CONCLUSIONS: There are many factors that may influence reported total Δ-9-THC content in industrial hemp. A robust analytical method was developed to analyze hemp samples in a trial regulatory study. The results indicate that the way hemp is sampled and analyzed may influence the legality of a crop, which could have negative economic and legal consequences.

An Improved Crop Scouting Technique Incorporating Unmanned Aerial Vehicle-Assisted Multispectral Crop Imaging into Conventional Scouting Practice for Gummy Stem Blight in Watermelon.

Multispectral imaging is increasingly used in specialty crops, but its benefits in assessment of disease severity and improvements in conventional scouting practice are unknown. Multispectral imaging was conducted using an unmanned aerial vehicle (UAV), and data were analyzed for five flights from Florida and Georgia commercial watermelon fields in 2017. The fields were rated for disease incidence and severity by extension agents and plant pathologists at randomized locations (i.e., conventional scouting) followed by ratings at locations that were identified by differences in normalized difference vegetation index (NDVI) and stress index (i.e., UAV-assisted scouting). Diseases identified by the scouts included gummy stem blight, anthracnose, Fusarium wilt, Phytophthora fruit rot, Alternaria leaf spot, and cucurbit leaf crumple disease. Disease incidence and severity ratings were significantly different between conventional and UAV-assisted scouting (P < 0.01, Bhapkar/exact test). Higher severity ratings of 4 and 5 on a scale of 1 to 5 from no disease to complete loss of the canopy were more consistent after the scouts used the multispectral images in determining sampling locations. The UAV-assisted scouting locations had significantly lower green, red, and red edge NDVI values and higher stress index values than the conventional scouting areas (P < 0.05, ANOVA/Tukey), and this corresponded to areas with higher disease severity. Conventional scouting involving human evaluation remains necessary for disease validation. Multispectral imagery improved watermelon field scouting owing to increased ability to identify disease foci and areas of concern more rapidly than conventional scouting practices with early detection of diseases 20% more often using UAV-assisted scouting.

Transgenic Expression of EFR and Bs2 Genes for Field Management of Bacterial Wilt and Bacterial Spot of Tomato.

Field trials were conducted at two locations in Florida to evaluate transgenic tomato expressing the ELONGATION FACTOR TU RECEPTOR (EFR) gene from Arabidopsis thaliana, the Bs2 gene from pepper, or both Bs2 and EFR (Bs2/EFR) for managing bacterial wilt caused by Ralstonia solanacearum and bacterial spot caused by Xanthomonas perforans. Expression of EFR or Bs2/EFR in the susceptible genotype Fla. 8000 significantly reduced bacterial wilt incidence (50 to 100%) and increased total yield (57 to 114%) relative to lines expressing only Bs2 or the nontransformed Fla. 8000 control, although the marketable yield was not significantly affected. Following harvest, surviving symptomatic and nonsymptomatic plants were assessed for colonization by R. solanacearum. There were no significant differences in the population at the lower stem. Interestingly, in the middle stem, no bacteria could be recovered from EFR or Bs2/EFR lines but viable bacterial populations were recovered from Bs2 and nontransformed control lines at 102 to 105 CFU/g of stem tissue. In growth-chamber experiments, the EFR transgenic tomato lines were found to be effective against seven different R. solanacearum strains isolated from the southeastern United States, indicating utility across the southeastern United States. In all of the bacterial spot trials, EFR and Bs2/EFR lines had significantly reduced disease severity (22 to 98%) compared with the Fla. 8000 control. The marketable and total yield of Bs2/EFR were significantly higher (43 to 170%) than Fla. 8000 control in three of four field trials. These results demonstrate for the first time the potential of using the EFR gene for field management of bacterial wilt and bacterial spot diseases of tomato.

Foliar Applications of Acibenzolar-S-Methyl Negatively Affect the Yield of Grafted Tomatoes in Fields Infested with Ralstonia solanacearum.

Three field experiments were conducted in Florida from 2012-2014 to assess the impact of acibenzolar-S-methyl (ASM), a systemic acquired-resistance inducer, applied as foliar spray or through drip-irrigation lines, on bacterial wilt incidence and yield of grafted tomatoes. The experiments were conducted in a field with race 1, biovar 1 strain of Ralstonia solanacearum, causal agent of tomato bacterial wilt. In all three experiments, the susceptible tomato variety BHN 602, grafted onto a resistant rootstock BHN 998, was compared with nongrafted BHN 602, treated with or without foliar applications of ASM and with grafted plants treated with foliar applications of ASM. In two experiments, an additional treatment of drip applications of ASM on grafted and nongrafted plants was evaluated. Grafting alone or in combination with drip applications of ASM (178.6 µM) significantly reduced disease incidence and increased total marketable yield relative to nongrafted treatments. There were no significant differences between grafted plants with or without drip ASM applications in terms of bacterial wilt incidence or total marketable yield. However, we demonstrate for the first time that foliar ASM applications on grafted plants negatively affects the total marketable yield compared with drip ASM applications on grafted plants or nontreated grafted control.

Host plant preference of harlequin bug (Hemiptera: Pentatomidae), and evaluation of a trap cropping strategy for its control in collard.

Harlequin bug, Murgantia histrionica (Hahn) (Hemiptera: Pentatomidae), is a piercing-sucking pest of cole crops, causing cosmetic damage in low populations, while heavy pest pressure can kill plants or entire fields. Field studies were conducted to evaluate a trap crop for control of harlequin bug in collard. Field-cage choice tests found that potential trap crop plant species, mustard (Brassica juncea 'Southern Giant Curled'), rapeseed (B. napus 'Athena'), rapini (B. rapa), and arugula (Eruca satica) attracted more harlequin bugs than collard (B. oleracea 'Champion') and a nonbrassica control, bean (Phaseolus vulgaris'Bronco'). Mustard was the most consistently selected by harlequin bug over collard in choice tests, and was found to be an effective trap crop for reducing feeding injury on collard at two experimental sites. Augmentation of the mustard trap crop with a systemic, neonicotinoid insecticide provided no added control of harlequin bug for the 10 wk duration in the spring season.